•
To set the delay timer, press the delay timer button (4). This will
switch the timer on for one hour.
•
To change the delay duration, press the delay timer button
again until the required delay duration is shown on the display,
alternating with the selected programme and the programme
duration.
•
To cancel the delay timer, press the delay timer button again until
0h shows on the display.
3 in 1 function button (5)
The dishwasher is equipped with a tablet function that automatically
adjusts the amount of rinse aid and dishwasher salt used during a
programme.
•
To use this function, press the button after selecting the
programme, before you close the door.
Half-load button (6) and indicator lights (7)
The dishwasher is equipped with a half-load function that allows for
either the upper or lower basket to be washed independently, or for
both baskets to be washed if they contain only a small number of
dishes.
•
To activate the half-load function, press the half-load button (6).
The two indicator lights (7) will illuminate next to the corresponding
symbol to represent whether the upper or lower basket will be
washed. If you have a small number of dishes, but they are in both
baskets, you can press the half-load button (6) until both indicator
llights are lit.
•
To cancel the half-load function (before the programme has begun)
press the half-load button until all indicators are extinguished.
8