Table of Contents
Advertisement
S243X / S243A
Multi Function 2D/3D Wide Monitor
Problem
Color defects
Check that the signal cable connector is properly connected and
that the connection pins are not bent or damaged. Try another
color temperature.
Size, position,
Adjust the picture characteristics as described in the section
shape or qualit
OSD Adjustment(4-3).
unsatisfactory
Duplicated
A problem with your graphics adapter or display unit. Contact
images
your service representative.
Image is not
Check that the display resolution and frequency from your PC
stable
or graphic adapter is an available mode for your monitor.In
your PC, you can check through Control panel, Display, Settings.
If the setting is not correct, use your computer utility program
to change the display settings.
Message :
Check that the signal cable connector is properly connected
No signal
and that the connection pins are not bent or damaged. If the
connector is loose, tighten the connector's screws. Check that
the computer is switched on.
The power LED
The system entered a power saving mode. You can reactivate
is a red color
the system by pressing any key or moving the mouse.
Possible solution
29/31
Advertisement
Table of Contents
