Hyundai S243X User Manual page 29

• FUNCTION
S243X / S243A
Multi Function 2D/3D Wide Monitor
PC ANALOG, DVI, COMPONENT MODE and HDMI MODE
F U NC T ION
IN PUT SEL ECT
ASPECT RATI O
DC R
RT C
DVI TO HD MI AU DI O
3D
VI R TU AL 3D ST EP
1920x1200 60H z
* 1900 x 1200 mode displays image to only 16:10 ratio
* When DCR function is set to On, BRIGHTNESS menu cannot be activated
.
setting 16:10 aspect ratio
DCR (Dynamic Contrast Ratio)
To increase contrast ratio by on and off.
RTC (Response Time compensation)
To control response time by on and off.
DVI TO HDMI AUDIO (Only HDMI mode)
To enable audio of your monitor when using the DVI to HDMI cable connection.
3D
+
–
Press / buttons to set to "Virtual 3D, Side by Side or Off.
VIRTUAL 3D STEP
Stretch or reduce the distance between objects in virtual 3D mode. Adjust with – or +
button.
INPUT SELECT
To switch between current source and other
HDM I
input source. (VGA/ COMPONENT/ DVI/ HDMI)
16:10
ASPECT RATIO
OFF
If you choose ASPECT RATIO on the OSD menu,
ON
you can adjust the following.
OFF
OFF
- 16:10(Full); Shows full screen regardless of screen size.
1 2 3
- 16: 9; Displays image at 16:9 ratio.
H DMI
- 4:3; Displays image at 4:3 ratio.
- 1:1; Displays image according to actual input pixels.
.
1600 x 1200 mode does not support image of 16:9 ratio
.
You can control DCR function only when
.
25/31