1.6.4
PCI Express Performance
1.6.5
Usability Features
1-14
•
Supports Port Selector (for dual-port drives)
•
Each port on the controller supports SAS devices, SATA devices, or
both using SSP, SMP, STP, and SATA. SSP enables communication
with other SAS devices.
•
Enables the controller to communicate with other SATA devices.
•
Supports staggered spin-up
•
Supports hot plug
The following list describes the PCI Express performance features of the
ServeRAID M5110 controller:
•
Provides a PCI Express 3.0 interface that:
–
Supports a dedicated PCI Express bus
–
Supports x8 lane configuration
–
Supports transfer rates of up to 8 GT/s (1 GB/s) per lane
–
Complies with the PCI Express Specification, Revision 3.0
•
Provides unequaled performance through the Fusion-MPT
architecture
•
Provides high throughput and low CPU utilization to offload the host
processor
The following list describes the usability features of the ServeRAID
M5110 controller:
•
Simplifies cabling with point-to-point, serial architecture
•
Supports smaller, thinner cables that do not restrict airflow
•
Provides drive spin-up sequencing control
•
Provides up to two LED signals for each PHY to indicate link activity
and faults
•
2
Provides an I
C interface for enclosure management
Overview