Kenmore 795.5182 Series Use & Care Manual page 40

Side-by-side refrigerator
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING GUIDE
PARTS AND FEATURES
Problem
Doors will not close
correctly or pop
open.
Doors are diffi cult to
open.
Refrigerator wobbles
or seems unstable.
Lights do not work.
Possible Causes
Food packages are blocking the door
open.
Ice bin, crisper cover, pans, shelves,
door bins, or baskets are out of
position.
The doors were removed during
product installation and not properly
replaced.
Refrigerator is not leveled properly.
The gaskets are dirty or sticky.
Door was recently closed.
Leveling legs are not adjusted
properly.
Floor is not level.
A light bulb has burned out.
NOTE: The refrigerator compartment
lamp is LED interior lighting, and
service should be performed by a
qualifi ed technician. (This statement
only applies for certain models.)
A light bulb is loose in the socket.
Rearrange food containers to clear the door and door
shelves.
Push bins all the way in and put crisper cover, pans,
shelves and baskets into their correct positions. See the
Using Your Refrigerator section for more information.
Remove and replace the doors according to the
Removing and Replacing Refrigerator Handles and
Doors section.
See Door Alignment in the Refrigeration Installation
section to level refrigerator.
Clean the gaskets and the surfaces that they touch.
Rub a thin coat of appliance polish or kitchen wax on
the gaskets after cleaning.
When you open the door, warmer air enters the
refrigerator. As the warm air cools, it can create a
vacuum. If the door is hard to open, wait one minute
to allow the air pressure to equalize, then see if it
opens more easily.
Refer to the Leveling and Door Alignment section.
It may be necessary to add shims under the leveling
legs or rollers to complete installation.
Replace with an appliance bulb of the same wattage,
size and shape (available at your local hardware
store). Refer to the Light Bulb Replacement section.
Unplug the refrigerator or turn off power at the circuit
breaker or fuse box. Gently remove the bulb and
reinsert. Reconnect power and reset the refrigerator
control. Refer to the Light Bulb Replacement section
for instructions on removing your light bulb.
39
Solutions

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents