AEG FAV55VI1P User Manual page 12

12 www.aeg.com
6.6 How to set the colour of
the TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
and
display is blank.
2. Press
• The indicators
and
• The indicator
flash.
• The display shows a number and
the letter C. Each number refers
to a different colour.
–
3. Press
the colour.
• You can see the different colours
on the kitchen floor.
4. Press the on/off button to confirm
the setting.
6.7 AirDry
AirDry improves the drying results with
less energy consumption.
and
, , ,
start to flash and the
.
, ,
go off.
continues to
= TimeBeam
deactivated.
again and again to change
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
until To improve the drying performance refer
to the XtraDry option or activate AirDry.
,
How to deactivate AirDry
The appliance must be in programme
selection mode.
,
1. To enter the user mode, press and
hold simultaneously
the indicators
and
display is blank.
2. Press
• The indicators
and
• The indicator
to flash.
• The display shows the current
setting:
3. Press
4. Press the on/off button to confirm
the setting.
and
, ,
start to flash and the
.
,
go off.
= AirDry activated.
to change the setting:
= AirDry deactivated.
until
, ,
, ,
continues