13. ADDITIONAL TECHNICAL INFORMATION............26 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler - features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Page 3
ENGLISH manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp •...
Page 5
ENGLISH • Do not pull the mains cable to • Dishwasher detergents are disconnect the appliance. Always pull dangerous. Follow the safety the mains plug. instructions on the detergent • This appliance is fitted with a 13 A packaging. mains plug. If it is necessary to •...
ENGLISH 4.1 Display 4.2 ECOMETER The ECOMETER indicates how the programme selection impacts energy and water consumption. The more bars are on, the lower the consumption is. indicates the most environmentally friendly programme A. ECOMETER selection for a normally soiled load. B.
Page 8
5.2 EXTRAS GlassCare You can adjust the programme selection GlassCare provides special care for a to your needs by activating EXTRAS. delicate load. The option prevents rapid changes in the wash temperature of the ExtraSilent selected programme and reduces it to 45 °C.
Page 9
ENGLISH Pro- Type of load Degree of Programme phases EXTRAS gramme soil • Crockery • Normal • Prewash • ExtraPower • Cutlery • Lightly • Wash 50 °C • GlassCare • Pots dried-on • Intermediate rinse • ExtraSilent • Pans •...
6. BASIC SETTINGS You can configure the appliance by changing basic settings according to your needs. Number Setting Values Description Water hardness From level 1L to Adjust the level of the water softener ac- level 10L (de- cording to the water hardness in your area.
Page 11
ENGLISH Softening hard water increases the consumption of water and energy as well as the programme duration. The higher the level of water softener, the higher the consumption and the longer the duration. Water hardness German de- French degrees mmol / l Clarke de- Water softener lev- grees (°dH)
Page 12
6.4 AirDry 6.7 TimeBeam AirDry improves the drying results. The appliance door opens automatically during the drying phase and remains ajar. TimeBeam displays the following information on the floor below the appliance door: • The programme duration when the programme begins.
ENGLISH Use OK to enter the selected setting and • The display shows the current to confirm changing its value. setting value. 2. Press OK to enter the setting. How to enter setting mode • The bar of the ECOMETER dedicated to the chosen setting is You can enter setting mode before on.
7.2 How to fill the rinse aid dispenser 4. Carefully shake the funnel by its handle to get the last granules inside. 5. Remove the salt around the opening of the salt container. CAUTION! Only use rinse aid designed specifically for dishwashers.
Page 15
ENGLISH 8.1 Using the detergent 2. Press the button dedicated to the option you want to activate. • The light related to the button is • The display shows the updated programme duration. • The ECOMETER indicates the updated level of energy and water consumption.
2. Press repeatedly until the display programme duration. After closing the shows the desired delay time (from 1 door, the appliance continues from the to 24 hours). point of interruption. The light related to the button is on.
Page 17
ENGLISH 1''). Follow the instructions on the • The filters are clean and correctly packaging. installed. • Select a programme according to the • The cap of the salt container is tight. type of load and the degree of soil. •...
10. CARE AND CLEANING 10.2 Internal cleaning WARNING! Before any maintenance • Carefully clean the appliance, other than running the including the rubber gasket of the programme Machine Care, door, with a soft damp cloth. deactivate the appliance and •...
Page 19
ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4.
Page 20
2. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil 3.
ENGLISH 10.7 Cleaning the ceiling spray element (B) counterclockwise and pull the spray arm downwards. 3. Wash the spray arm under running water. Use a thin pointed tool, e.g. a We recommend to clean the ceiling toothpick, to remove particles of soil spray arm regularly to prevent soil from from the holes.
Page 22
Problem and alarm code Possible cause and solution The programme does not • Make sure that the appliance door is closed. start. • If the delay start is set, cancel the setting or wait for the end of the countdown.
Page 23
ENGLISH Problem and alarm code Possible cause and solution The appliance trips the cir- • The amperage is insufficient to supply simultaneously all cuit-beaker. the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the applian- ces in use.
Page 24
Problem Possible cause and solution There are whitish streaks or • The released quantity of rinse aid is too high. Adjust bluish layers on glasses and the rinse aid level to a lower level. dishes. • The quantity of detergent is too high.
12. PRODUCT INFORMATION SHEET Trade Mark Model FAV55BVI2P 911434622 Rated capacity (standard place settings) Energy efficiency class A+++ Energy consumption in kWh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes.