Security Screen Options - Dell Latitude 3189 Owner's Manual

Security screen options

Option Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
Default setting: Not set
System Password Allows you to set, change, or delete the system password.
Default setting: Not set
Internal HDD-0 Allows you to set, change, or delete the administrator password.
Password
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password Allows you to specify the minimum and max password lengths of the Administrator and System passwords.
Configuration
•
•
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they
are set. The options are:
•
•
Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set.
Changes If disabled, the setup options are locked by the admin password.
Option "allow wireless switch changes" is not selected by default.
UEFI Capsule Allows you to enable or disable. This option controls whether this system allows BIOS updated via UEFI capsule
Firmware Updates update packages. The options are:
•
TPM 2.0 Security Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
NOTE: You must set the admin password before you set the system or hard drive password. Deleting the
admin password automatically deletes the system password and the hard drive password.
NOTE: Successful password changes take effect immediately.
NOTE: Successful password changes take effect immediately.
NOTE: Successful password changes take effect immediately.
NOTE: If Strong Password is enabled, the Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least eight characters long.
min-4—by default, if you want to change you can increase the number.
max-32—you can decrease the number.
Disabled —enabled by default
Reboot bypass
Enable UEFI Capsule Firmware—enabled by default
System setup options 53