Tenda FH303 User Manual page 7

3
Back Panel:
Interface/button overview:
Interface
/Button
POWER
WAN
LAN(1/2/3/4)
RESET/WPS
TX
Power receptacle. Note: Using a power supply with a
different voltage rating than the one included in
the package may damage the router.
The Internet port for connection to the cable or the
DSL modem or direct ISP service via an Ethernet
cable.
Connect Ethernet devices such as computers,
switches, and hubs.
Press and hold the button for 7 seconds to restore the
router to its original factory default settings or for
about 1 second to enable the WPS functionality.
Press and hold the button for 3 seconds and then
release, the color of SIGNAL light will change and the
wireless signal strength will change also.
Blue: The wireless signal strength is best
Green: The wireless signal strength is good
FH303 Wireless N300 High Power Router
Description
5