CyberHome LDV 1010B Operation Manual page 21

Connecting external audio video source
Your DVD player can become an audio video output device - using the LCD and speakers - for most camcorders, VCR's, etc. For
example, you can use your camcorder's composite video and analog stereo outputs to connect to the unit for playback.
1
Use the included Video Cable to connect the Video
Output of your output device (Camcorder, etc) to the
unit's Video (Input) connector.
2 2
Next, connect the stereo analog audio outputs of the
external device to the audio input plug of the player.
4
Press the MONITOR key on the front panel / remote
control two times. The LED indicator will now glow
orange to indicate it is now ready to accept an external
device input.
POWER
BOOKMARK
AUDIO / VIDEO CONNECTIONS AUDIO / VIDEO CONNECTIONS AUDIO / VIDEO CONNECTIONS
POWER
ON
OFF
CH-DVD 402
LCD SETUP MONITOR
GOTO DISPLAY
TITLE MENU
ANGLE SUBTITLE PROGRAM
3
Turn on the output device, then the DVD player and
select output on the Camcorder.
1 1
1 2
L
21
VIDEO VIDEO VIDEO VIDEO
OUT IN IN IN
STEREO AUDIO OUT STEREO AUDIO IN STEREO AUDIO IN STEREO AUDIO IN
R R R R
(RED) (RED) (RED) (RED)
L L L L
(WHITE) (WHITE) (WHITE) (WHITE)