Table of Contents
Advertisement
4. Loosen all four mounting bracket screws. Remove
the two canopy screws and washers from the round
holes in the canopy. Set aside for later use. Detach
mounting bracket from canopy (Fig. 4).
Mounting
Bracket Screw
5. Secure the mounting bracket to the outlet box using
screws and washers provided with the outlet box
(not included) (Fig. 5).
Note: It is very important that you use proper hardware
when installing the mounting bracket as it supports
the fan.
Important: If using the angle mount, ensure that the
open end of the mounting bracket is installed facing
the peak of the ceiling.
MOUNTING BRACKET INSTALLATION
Washer
Fig. 4
Mounting Bracket
Screws
Fig. 5
6
Mounting
Bracket
Washer
Canopy
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PALM ISLAND and is the answer not in the manual?
Questions and answers