Bottom Cover - HP 240 G6 Maintenance And Service Manual

Bottom cover

Description
Bottom cover for use in models with an optical drive
Bottom cover for use in models without an optical drive
Before removing the bottom cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
To remove the bottom cover:
1. Remove the 2 Phillips PM2.5×5.0 screws (1) that secure the bottom cover to the computer.
2. Remove the 6 Phillips PM2.5×12.0 screws (2) that secure the bottom cover to the computer.
Battery on page 30).
Optical drive on page 31), if installed.
Component replacement procedures
Spare part number
929157-001
931550-001
37