Bottom Cover - HP 250 G6 Maintenance And Service Manual

Bottom cover

Description
Bottom cover for use in models with an optical drive:
Asteroid silver
●
● Dark ash siliver
Bottom cover for use in models without an optical drive:
● Dark ash siliver
Before removing the bottom cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
To remove the bottom cover:
1. Position the computer upside down with the front toward you.
2. Peel back the rubber feet enough to access the screws underneath (1)
40 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 32).
Optical drive on page 33), if installed.
Spare part number
929894-001
929895-001
929897-001