Solving Setup Problems; Noise After Ink Installation - Epson XP-340 User Manual

4. Press the arrow buttons to select one of these options and press the OK button:
• Network Settings: Resets all network settings.
• All except Network: Resets all control panel settings, except for network settings.
• All Settings: Resets all control panel settings.
You see a confirmation screen.
5. Press the OK button to reset the selected settings.
(Press the
Parent topic:

Solving Setup Problems

Check these sections if you have problems while setting up your product.

Noise After Ink Installation

Software Installation Problems
Control Panel Setup Problems
USB Connection Problems
Parent topic:
Noise After Ink Installation
If you hear noises from your product after installing ink, check the following:
• The first time you install ink cartridges, the product must charge its print head. Wait until charging
finishes before you turn off the product, or it may charge improperly and use excess ink the next time
you turn it on. Your product is finished charging the print head when the
• If the product's print head stops moving or making noise, and the charging process has not finished
after approximately 5 minutes, turn off your product. Turn it back on and check to see if charging is still
in progress. If it is still in progress, contact Epson for help.
Parent topic:
Related topics
Replacing Ink Cartridges
stop button if you want to cancel the operation.)
Solving Problems
Solving Problems
Solving Setup Problems
181
power light stops flashing.