Cleaning The Print Head Using A Computer Utility - Epson XP-340 User Manual

The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is
finished.
You see this screen:
Caution: Never turn off the product during a cleaning cycle or you may damage it.
7. Select Nozzle Check, press the OK button, and press the
confirm that the print head is clean.
If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without
printing and try cleaning the print head again. If quality still does not improve, one of the ink cartridges
may be old or damaged and needs to be replaced.
Parent topic:
Related tasks
Checking the Nozzles Using the Product Control Panel
Related topics
Loading Paper
Replacing Ink Cartridges

Cleaning the Print Head Using a Computer Utility

You can clean the print head using a utility on your Windows or Mac computer.
1. Make sure no product lights are indicating errors.
2. Load a few sheets of plain paper in the product.
Print Head Cleaning
start button to run a nozzle check to
163