Line Of Dots Appears In All Scanned Images; Straight Lines In An Image Appear Crooked; Image Is Distorted Or Blurry - Epson XP-340 User Manual

Related tasks
Placing Originals on the Scanner Glass
Scanning in Epson Scan 2

Line of Dots Appears in All Scanned Images

If a line of dots appears in all your scanned images, clean the scanner glass with a soft, dry, lint-free
cloth or use a small amount of glass cleaner on the cloth, if necessary. Paper towels are not
recommended.
Caution: Do not spray glass cleaner directly on the scanner glass.
Parent topic:
Related tasks
Cleaning Your Product

Straight Lines in an Image Appear Crooked

If straight lines in an original appear crooked in a scanned image, make sure to place your original
straight when you scan it.
Parent topic:
Related tasks
Placing Originals on the Scanner Glass

Image is Distorted or Blurry

If a scanned image appears distorted or blurry, try these solutions:
• Make sure your original is not wrinkled or warped. This may prevent the original from laying flat on the
scanner glass.
• Do not move your original or your product during scanning.
• Your product will not operate properly while tilted at an angle. Place your product on a flat, stable
surface that extends beyond its base in all directions.
• Adjust these Epson Scan 2 settings (if available) and try scanning again:
• Increase the Resolution setting.
• If the Image Type setting is Black & White, adjust the Threshold setting.
• Select the Unsharp Mask setting.
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
206