Switch Installation; Safety Warnings - Cisco Catalyst 2960-L Smart Managed Series Hardware Installation Manual

Switch Installation

For initial switch setup, assigning the switch IP address, and powering on information, see the switch getting
started guide on Cisco.com.
This chapter contains these topics:
•
•
•
•
•
•
•
•
•
•
•

Safety Warnings

This section includes the warning statements relating to basic installation. Read this section before you start
the installation procedure.
Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,
and watches). Metal objects will heat up when connected to power and ground and can cause serious burns
or weld the metal object to the terminals. Statement 43
Warning Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury and
equipment damage. Statement 48
Safety Warnings, on page 13
Box Contents, on page 16
Tools and Equipment, on page 17
Installation Guidelines, on page 17
Verifying Switch Operation, on page 18
Installing the Switch, on page 18
Installing the Power Cord Retainer (Optional), on page 24
Installing SFP Modules, on page 27
Connecting to SFP or SFP+ Modules, on page 28
10/100/1000 PoE and PoE+Port Connections, on page 31
10/100/1000 Port Connections, on page 33
Cisco Catalyst 2960-L Smart Managed Series 24-Port and 48-Port Switch Hardware Installation Guide
2
C H A P T E R
13