Table of Contents
Advertisement
0
Programme settings
P r o g r a m m e s e t t i n g s
Buttons
Not all buttons and their functions can be selected in all programmes.
Note:
Reduced Ironing
60 min
Reduced Ironing
120 min
Low Heat
End Signal
Drying target ü:
Cupboard-dry plus
Cupboard dry
Iron dry
Fine adjust
Displays
Explanations and information
The drum moves the laundry at regular intervals after drying to
prevent creasing. You can extend the automatic Anti-Crease
function by 60 minutes (by pressing Reduced Ironing 60 min )
or 120 minutes (by pressing Reduced Ironing 120 min ) after
any programme has finished.
Reduced temperature for delicate fabrics, e.g. polyacrylic or
elastane; may increase the drying time.
Use the End Signal button to activate or deactivate the audible
signal that sounds to indicate that the programme has ended. If
the setting has been selected, the button's indicator light will be
lit and the signal tone is activated.
Select the dryness level depending on the required degree of
dryness.
If you have selected a dryness level, this will be stored for the
selected programme even after the appliance has been
switched off. Exception: The settings will not be saved for Cot-
tons.
Multi-layered, thick laundry that does not dry readily.
Ò
Normal, single-layered laundry.
»
Normal, single-layered laundry that still needs to be damp after
ö
drying and is suitable for ironing or hanging up.
If you think the laundry is still too damp when the drying pro-
5
gramme has ended, you can adjust the degree of dryness to
5 5
achieve a particular dryness level. To increase the dryness level,
5 5 5
set the degree of dryness to between 5 and 5 5 5. This will
extend the programme duration but the temperature will remain
the same.
Once you have adjusted the degree of dryness for a pro-
gramme, this setting will be retained for the programme even
after the appliance has been switched off.
Programme settings
en
25
Advertisement
Table of Contents
