Table of Contents
Advertisement
Secure the other side of the drain
6.
hose using the remaining
accessories, depending on the
connection situation.
Washbasin:
Siphon:
The connection point must be
secured using a hose clamp (12-
22 mm clamping range, available
from specialist retailers).
When connecting to a siphon, make
sure that the drain hose is routed at
a height of at least 80 cm, but no
more than 100 cm.
Floor drain:
Draining the condensation water
Caution!
Risk of material damage due to
leaks or draining water.
Secure the drain hose to prevent it
from slipping out. Do not kink or
bend the drain hose. The height
difference between the surface on
which the appliance is installed and
the drain hose must be no more than
100 cm.
Caution!
Risk of accumulated water being
drawn back into the appliance and
causing material damage.
Check that the water drains away
quickly. The drain must not be
sealed or blocked.
Pull out the condensation container
7.
horizontally and empty it.
Turn the condensation container
8.
180° onto its underside and remove
the stopper that is fitted.
en
35
Advertisement
Table of Contents
