Table of Contents
Advertisement
Programme settings
en
Finished in
--------
26
‚ - ƒ...
Before starting the programme, you can preselect the pro-
gramme end time ("Ready in" time) in hourly increments (h =
hour), up to a maximum of 24 hours:
Select a programme.
1.
The programme duration will be displayed for the selected
programme, e.g. ‚:...† (hours:minutes).
Press Finished in repeatedly until the required number of
2.
hours is displayed.
Note:
ting values, and the Finished in – button to reduce them.
3.
Press Start/Pause A.
This activates the time delay.
Before the programme starts, the selected number of
hours (e.g. ‰) is shown on the display and counts down
until the drying programme starts. The duration of the pro-
gramme will then be displayed.
Note:
time.
E.g.
The drying time for timed programmes can be extended to up
\ ‹ : ...‹
to 3 hours 30 minutes in 10-minute increments.
Use the Finished in + button to increase the set-
The programme duration is included in the "Ready in"
Advertisement
Table of Contents
