Denon AVR-S730H Owner's Manual page 231

Contents Connections Playback Settings Tips Appendix
z1 This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played.
z2 This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS:X or DTS signal is played.
z3 This item can be selected when a DTS:X signal that is compatible with the Dialog Control function is input.
z4 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z5 This setting is available when "Subwoofer Mode" in the menu is set to "LFE+Main". (v p. 178)
z6 This item cannot be set when "Dynamic EQ" is set to "On". (v p. 142)
z7 This item cannot be set when Audyssey ® Setup (Speaker Calibration) has not been performed.
z8 This item cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input.
z9 This item cannot be set when "MultEQ " is set to "Off". (v p. 141)
®
z10 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
231
Front panel Display Rear panel Remote Index