HomeMatic HmIP-STH Mounting Instruction And Operating Manual page 38

Start-up
If the device is mounted to a flush-mounting box,
there may be no open conductor ends.
If changes or works have to be made on the house
installation (e.g. extension, bypass of switch- or
socket inserts) or the low-voltage distribution for
mounting or installing the device, the following
safety instruction must be considered:
Please note! Only to be installed by persons with
the relevant electro-technical knowledge and
experience!*
Incorrect installation can put
• your own life at risk;
• and the lives of other users of the electrical sys-
tem.
Incorrect installation also means that you are running the
risk of serious damage to property, e.g. because of a fire.
You may be personally liable in the event of injuries or
damage to property.
Contact an electrical installer!
38