Advertisement
Available languages
Available languages
EN
Product Mounting Diagram
Overhead
Mounting
Control Panel Description
Button
<MENU>
<ENTER>
<UP>
<DOWN>
Passcode
After being prompted, enter the following passcode by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
Menu Map
Main Level
STAT
AUTO
RUN
ADDR
3
QUICK REFERENCE GUIDE
Mounting Clamp
Safety Cable
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value into the
selected function
Navigates upwards through the menu list or increases the numeric value when in a
function
Navigates downwards through the menu list or decreases the numeric value when in
a function
Programming Levels
RED
R.
GREEN
G.
BLUE
B.
WHITE
W.
ZOOM
Z.
STROBE
S.
AT. 1-10
PR 1-10
DMX
SLAVE
D. 001-512
Floor Mounting
Function
Combines red, green, blue, and white
to make a custom color
0-255
(0–100%)
Changes the beam angle (zoom)
Selects the strobe
0-20
frequency (0–20 Hz)
Selects automatic programs and auto
P. 0-255
program speed
Selects customizable programs
Receives DMX signals from the DMX
controller
Receives DMX signals from the master
Sets the DMX starting address
Colorado 1 Quad Zoom QRG Rev. 3
Description
Advertisement
