Advertisement
Available languages
Available languages
What is Included
•
Colorado 1 Quad Zoom
•
Seetronic Powerkon IP65 power cord
•
Gel frame holder (7.5 in/191 mm accessories)
•
Gel frame
•
Quick Reference Guide
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
You can link up to 13 Colorado 1 Quad Zoom products at 100 VAC, 15 at 120 VAC, 27 at 208 VAC, 28 at 230 VAC, or 29
at 240 VAC. Never exceed this number. Power linking cords can be purchased separately.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
•
When using this product in an outdoor IP65 type environment, be sure to use IP65 (or higher)
rated power cables and secure unused ports with attached IP65 covers.
DMX Linking
The Colorado 1 Quad Zoom will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is
available from
www.chauvetprofessional.com.
DMX Connection
The Colorado 1 Quad Zoom uses a 5-pin DMX data connection for its DMX personalities: TOUR, TR16, FULL, ARC.1,
AR1.D, ARC.2, AR2.D, C1Q, STD.Y, AR2.S, AR2.Z, and HSV. See the User Manual for information about connecting
and configuring the product for DMX operation.
When using this product in an outdoor IP65 type environment, be sure to use IP65 (or higher) rated
data cables and secure unused ports with attached IP65 covers.
The C1Q personality has been designed to be used to match the Colorado 1-Quad series. In this
personality, the zoom is locked to match the beam and field angles of the Colorado 1-Quad series.
For optimum control of the 16-bit dimming channels in the TR16, FULL, and STD.Y personalities, be
sure that both dimming curves in SETTING > DIMMER are set to OFF
Master/Slave Connection
The Colorado 1 Quad Zoom uses the DMX data connection for its Master/Slave mode. See the User Manual for
information about connecting and configuring the product for master/slave operation.
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Colorado 1 Quad Zoom QRG Rev. 3
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
Safety
Notes. Use at least one mounting point per product. Make sure the
Wire (Europe)
Brown
Blue
Green/Yellow
EN
Screw Color
Yellow/Brass
Silver
Green
2
Advertisement
