Canon EOS REBEL T7I Wi-Fi (Wireless Communication) Function Instruction Manual page 88

Printing Images
With a Wi-Fi connection to a printer established, a picture cannot be

taken even if the camera's shutter button is pressed.
Movies cannot be printed.

Before printing, be sure to set the paper size.

Certain printers may not imprint the file number.

If [Bordered] is set, certain printers may imprint the date on the border.

Depending on the printer, the date may appear faint if it is imprinted on a

bright background or on the border.
RAW images cannot be printed by selecting [Print order]. When printing,

select [Print image] and print.
When you use a battery to power the camera, make sure it is fully

charged.
Depending on the image's file size and image-recording quality, it may

take some time to start printing after you select [Print].
To stop printing, press <0> while [Stop] is displayed, then select [OK].

When printing with [Print order], if you stopped printing and want to

resume printing of the remaining images, select [Resume]. Note that
printing will not resume if any of the following occurs.
• You changed the print order or deleted any of the print ordered images
before resuming printing.
• When index is set, you changed the paper setting before resuming
printing.
• The card's remaining capacity was low when you paused printing.
If a problem occurs during printing, see page 94.

88
Select [OK].
6

When printing is complete, the screen
for step 3 will reappear.
Terminate the Wi-Fi connection.
7
Press the <k> button to display the

confirmation dialog. Select [OK], then
press <0> to terminate the Wi-Fi
connection.