Canon EOS REBEL T7I Wi-Fi (Wireless Communication) Function Instruction Manual page 112

Establishing a Wi-Fi Connection with WPS (PBC Mode)
The IP address can only be set automatically in environments using DHCP
servers, or access points or routers with DHCP server functionality, such
that the IP addresses, etc. are required to be assigned automatically.
112
Select [WPS (PBC mode)].
6
Select [OK] and press <0> to go to

the next screen.
Connect to the access point via
7
Wi-Fi.
Press the access point's WPS button.

For details about where the button is
located and how long to press it, refer
to the access point's instruction
manual.
Select [OK] and press <0> to

establish a Wi-Fi connection with the
access point.

When a Wi-Fi connection with the
access point is established, the next
screen is displayed.
Select [Auto setting].
8
Select [OK] and press <0> to

display the setting screen (p.113) for
the Wi-Fi function selected in step 2.
If [Auto setting] results in an error or

if you want to specify the settings
manually, see page 161.