Saving Images - Canon EOS REBEL T7I Wi-Fi (Wireless Communication) Function Instruction Manual

Saving Images

This section describes how to connect the camera and Connect Station
(sold separately) via Wi-Fi using the NFC function. To save images in
other ways, refer to the Connect Station Instruction Manual.
On the [Wi-Fi settings] screen, set [Wi-Fi] to [Enable] and set [NFC

connection] to [Enable] in advance (p.12, 159).
NFC connect point
74
Hold the camera close to Connect
1
Station.
Turn on the camera and Connect

Station, then hold the camera's p
mark close to the Connect Station's
NFC connect point.
 When a message indicating the Wi-Fi
connection is being established is
displayed on the camera's LCD
monitor and Connect Station
responds, move the camera away
from Connect Station.
When a Wi-Fi connection is

established, Connect Station checks
the images on the memory card, then
saves only the unsaved images.
Terminate the Wi-Fi connection.
2
After images are saved, the screen

on the left will appear on the camera's
LCD monitor. Press <0> to
terminate the Wi-Fi connection.