Care And Maintenance - Veridian Healthcare 01-506 Instruction Manual

Automatic digital blood pressure wrist monitor
Hide thumbs Also See for 01-506:
Table of Contents

Advertisement

Available languages

Available languages

care and maintenance

Proper care and maintenance of your blood pressure monitor will help ensure long life for the
product; improper use of the monitor may void the included warranty.
Monitor Care and Maintenance
• Do not use any liquids on the monitor; use a soft, dry cloth to clean the monitor as needed
• Storage outside of stated storage temperature may result in measurement error or device
malfunction; storage environment temperature is: -4°F – 131°F (-20°C – 55°C); humidity:
≤90% RH
• Do not store in direct sunlight
• Always keep the unit unplugged while not in use; remove the batteries if the unit will not be
used for an extended period of time
• Do not attempt to disassemble your monitor; disassembling your monitor may void the
manufacturers warranty
• Do not subject the monitor to strong shocks; take care not to drop the monitor
• With proper care, the monitor will maintain performance for a minimum of 10,000
measurements or three years
• No component of this device can be maintained by the user; the circuit diagrams, component
part lists, descriptions, calibration instruction or other information which will assist the user's
appropriately qualified technical personnel to repair those parts of equipment which are
designated repairable can be supplied.
• It is recommended that monitor performance be reviewed every two years or after service or
repair; please contact your service provider or call customer care
Cuff Care and Maintenance
• The cuff should not be submerged or washed in a washing machine, but may be spot cleaned
with a mild-detergent as needed
• Clean the cuff thoroughly after every 200 uses or more frequently as needed
• Never attempt to iron or dry the cuff; if the cuff becomes wet, allow the cuff to air dry completely
before use or storage
• To disinfect the cuff, wipe the inside (skin contact side) of the cuff using a cloth lightly moistened
with 70% - 90% ethyl rubbing alcohol and allow to air dry; it is suggested to disinfect the cuff
frequently when used in clinical sittings or if the cuff is contaminated in any way
• With proper care, the cuff will maintain performance for a minimum of 1000 measurements
18
– English

Advertisement

Chapters

Table of Contents
loading

Table of Contents