Table of Contents
Advertisement
press OK.
6 - Select the country where you are now and
press OK.
7 - Select Cable (DVB-C).
8 - Select Start to search channels, or
select Settings for DVB-C settings .
9 - Press BACK to close the menu.
Network frequency mode
If you intend to use the fast Quick scan method
in Frequency scan to search for channels,
select Automatic. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you received a specific network frequency value to
search for channels, select Manual.
Network frequency
With the Network frequency mode set to Manual,
you can enter the network frequency value received
from your cable provider here. To enter the value,
use the number keys.
Frequency scan
Select the method of searching for channels. You can
select the faster Quick scan method and use the
predefined settings used by most cable providers in
your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended Full scan method. This method will take
more time to search for and install channels.
Frequency step size
The TV searches for channels in steps of 8MHz.
If this results in having no channels installed or if
some channels are missing, you can search in smaller
steps of 1MHz. Using the 1MHz steps will take more
time to search for and install channels.
Digital channels
If you know your cable operator is not offering digital
channels, you can skip searching for digital channels.
Analogue channels
If you know your cable operator is not offering
analogue channels, you can skip searching for
analogue channels.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select Free +
Scrambled. If you did not subscribe to pay TV
channels or services, you can select Free
Channels Only .
For more information, in Help, press the colour
key
Keywords and look up CAM, conditional
access module.
Reception quality
You can check the quality and signal strength of a
digital channel. If you have your own antenna, you
can reposition the antenna to try and improve the
reception.
To check the reception quality of a digital channel...
1 - Tune to the channel.
2 - Press , select Antenna/Cable installation and
press OK. Enter your PIN code if necessary.
3 - Select Digital: Reception Test and press OK.
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number
with and and change the number
with and . To check the frequency,
select Search and press OK.
If you use DVB-C to receive channels, the
option Symbol rate mode is available. For Symbol
rate mode, select Automatic, unless your cable
provider gave you a specific symbol rate value. To
enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually...
1 - Press , select Antenna/Cable installation and
press OK. Enter your PIN code if necessary.
2 - Select Analogue: Manual Installation and
63
Advertisement
Table of Contents
