Table of Contents
Advertisement
audio in one of these languages is available, the TV
will switch to the audio language.
To set the primary and secondary audio language...
1 - Press , select General settings and
select Languages > Primary audio or Secondary
audio.
2 - Select the language you need and press OK.
3 - Press (left) to go back one step or
press BACK to close the menu.
Select an audio language
If none of the preferred audio languages are
available, you can select another audio language if
available. If no audio languages are available, you
cannot select this option.
To select an audio language when none of your
preferred languages are available...
1 - Press OPTIONS.
2 - Select Audio language and select one of the
languages as audio temporarily.
Dual I-II
If an audio signal contains two audio languages but
one language or both has no language indication, this
option is available.
Common Interface
If you installed a CAM in one of the Common
Interface slots, you can view the CAM and operator
information or do some CAM related settings.
To view the CAM information...
1 - Press SOURCES.
2 - Select the channel type you are using the CAM
for Watch TV or Watch satellite.
3 - Press OPTIONS and select Common
Interface.
4 - Select the appropriate Common Interface slot
and press (right).
5 - Select the TV operator of the CAM and press OK.
The following screens come from the TV operator.
HbbTV on this channel
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press OPTIONS and select HbbTV on this
channel and press (right).
3 - Select Off and press OK.
4 - Press (left) to go back one step or
press BACK to close the menu.
To block HbbTV on TV completely...
1 - Press , select General settings
2 - Select Off and press OK.
3 - Press (left) to go back one step or
press BACK to close the menu.
MHP applications
Enable or disable the MHP applications.
Mono / Stereo
You can switch the sound of an analogue channel to
Mono or Stereo.
To switch to Mono or Stereo...
1 - Tune to an analoge channel.
2 - Press OPTIONS, select Mono/Stereo and
press (right).
3 - Select Mono or Stereo and press OK.
4 - Press (left) to go back one step or
press BACK to close the menu.
Status
Select Status to view technical information on the
channel (if it is analogue or digital) or a connected
device you are watching.
Share
Enables the user to communicate his activity with his
social networks (such as Twitter or email).
7.5
Text / Teletext
Text pages
To open Text/Teletext press TEXT, while you are
watching TV channels.
To close Text, press TEXT again.
Select a Text page
To select a page . . .
1 - Enter the page number with the number keys.
2 - Use the arrow keys to navigate.
3 - Press a colour key to select a colour-coded
subject at the bottom of the screen.
Text sub-pages
27
> HbbTV.
Advertisement
Table of Contents
