Table of Contents
Advertisement
Channel logos
In some countries, the TV can show the channel
logos.
If you do not want these logos to appear, you can
switch them off.
To switch off the logos...
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Channel logos and press (right) to
enter the menu.
3 - Select Off and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
HbbTV
If a TV channel offers HbbTV pages, you must first
switch on HbbTV in the TV settings to view the pages.
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select HbbTV, and press OK.
3 - Select On or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press OPTIONS and select HBB TV on this
channel and press OK.
3 - Select Off and press OK.
Factory settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings...
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select Factory settings and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation...
1 - Press , select General settings and
select Reinstall TV.
2 - Follow the instructions on screen. The installation
may take a few minutes.
Channel list copy
For more information, in Help, press the colour
key
Keywords and look up Channel List Copy,
copy.
Satellite list copy
For more information, in Help, press the colour
key
Keywords and look up Satellite List Copy,
copy.
CAM settings
Switch on operator profile
To switch on operator profile for CI+/CAM for easy
channel installation and updates...
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select CAM Operator profile and press OK.
3 - Select Enable and press OK
4 - Press (left) repeatedly if necessary, to close
the menu.
View CAM profile name
To display profile name of the CAM card connected...
1 - Press , select General settings and
press (right) to enter the menu.
2 - Select CAM profile name and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Universal access
For more information, in Help, press the colour
key
Keywords and look up Universal access.
55
Advertisement
Table of Contents
