BT Freestyle 1050 User Manual page 17

To record your outgoing message
Press buttons in order shown
OGM Press and hold down the
Your Freestyle 1050 will beep and r
flashes on the message counter.
Keep holding down the
OGM
say your message into the microphone.
When you have finished speaking,
OGM
release the
OGM
Your Freestyle 1050 will beep, play
back your message, then beep to
confirm the recording. It will then
return to 'Answer On' mode.
To re-record your outgoing message,
repeat this procedure.
To check your outgoing message
Press the button.
OGM
OGM
Your Freestyle 1050 will beep, play back
your message, then beep to confirm
the recording. It will then return to
'Answer On' mode.
"Beep. Your message. Beep"
button.
OGM
button and
OGM
button.
To delete your outgoing message
You can delete your outgoing message
and return to your Freestyle 1050's
pre-recorded outgoing message.
OGM
Press the button.
OGM
"Your message"
Your outgoing message is played back
to you.
While the message is playing, press
the button.
DELETE
Your Freestyle 1050 will beep and play
its pre-recorded outgoing message.
"Hello, your call cannot be taken at the
moment, so please leave your message
after the tone."
Your own message has now been
replaced by the Freestyle 1050's original
pre-recorded message.
To switch the answering machine
on/off
Press the
ANSWER ON/OFF
Answer
on/off
Your Freestyle 1050 will announce
"Answer off ".
Display shows a single dash.
Press the
ANSWER ON/OFF
Answer
on/off
again. The machine will announce
"Answer On".
button.
button
13