Scrolling The Theaterwide™ Picture; Automatically Adjusting The Aspect Ratio - Toshiba 50L711U18 Manual

Scrolling the TheaterWide™ picture
You can set separate scroll settings for the
TheaterWide 2 and TheaterWide 3 picture size
modes for each input. For more information about
pictures sizes, see Adjusting the picture size
page 67.
1 Press MENU, press
then press OK.
2 Highlight Display Settings, then press OK.
3 Highlight Picture Position, then press OK.
4 Press or to move the picture up and down as
needed, then press OK. To save the new settings,
press or to highlight Done, then press OK.
OR
To revert to the factory defaults, highlight Reset
then press OK.
5 Press EXIT to close the menu.
on
or to highlight Picture,
www.tv.toshiba.com
50" / 55" 2160p (4K), 60Hz, LED Chromecast built-in TV

Automatically adjusting the aspect ratio

When the Auto Aspect option is set to On, your TV
automatically selects the picture size when one of the
following input sources is received:
• 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE IN jack
• 480i, 480p, 720p, 1080i, 1080p, 2160p, or VGA (60Hz)
signal from an HDMI jack
Aspect Ratio of Signal
Source
4:3 Normal
4:3 Letter Box
16:9
Not defined (no ID-1
data or HDMI® aspect
data)
1 Press MENU, press
then press OK.
2 Highlight Display Settings, then press OK.
3 Highlight Auto Aspect, then press OK.
4 Highlight On, then press OK. (To turn off Aspect
Ratio, select Off.)
5 Press EXIT to close the menu.
Auto Aspect is set to
On)
4:3
TheaterWide 2
Full
The current picture size
you selected, see
Adjusting the picture
size on page 67.
or to highlight Picture,
69