Scrolling The Theaterwide™ Picture; Automatically Adjusting The Aspect Ratio - Toshiba 65L350U Instruction Manual

Scrolling the TheaterWide™ picture
You can set separate scroll settings for the
TheaterWide 2 and TheaterWide 3 picture size
modes for each input. For more information about
pictures sizes, see Adjusting the picture size
page 49.
1 Press MENU, press
then press ENTER.
2 Highlight Display Settings, then press ENTER.
3 Highlight Picture Position, then press ENTER.
4 Press or to move the picture up and down as
needed, then press ENTER. To save the new
settings, press
press ENTER.
OR
To revert to the factory defaults, highlight Reset
then press ENTER.
5 Press EXIT to close the menu.
50
on
or to highlight Picture,
or to highlight Done, then
www.tv.toshiba.com

Automatically adjusting the aspect ratio

When the Auto Aspect option is set to On, your TV
automatically selects the picture size when one of the
following input sources is received:
• 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE IN jack
• 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal
from an HDMI jack
Aspect Ratio of Signal
Source
4:3 Normal
4:3 Letter Box
16:9
Not defined (no ID-1
data or HDMI® aspect
data)
1 Press MENU, press
then press ENTER.
2 Highlight Display Settings, then press ENTER.
3 Highlight Auto Aspect, then press ENTER.
Toshiba 65" 1080p 120Hz LED TV
Auto Aspect is set to
On)
4:3
TheaterWide 2
Full
The current picture size
you selected, see
Adjusting the picture
size on page 49.
or to highlight Picture,