Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Club Par 12-6 RGBWAUV IEC power cable (1,5 m) ...
Page 4
• If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
Club Par 12-6 RGBWAUV • The user is responsible for correct positioning and operating of the Club Par 12-6 RGBWAUV. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device. • This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth.
Club Par 12-6 RGBWAUV The Club Par 12-6 RGBWAUV can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug.
Club Par 12-6 RGBWAUV Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Club Par 12-6 RGBWAUV Description of the device Features The Club Par 12-6 RGBWAUV is an compact light effect with high output and great effects. Ideal solution for small clubs and mobile DJs Compact size Sound Control ...
09) IEC power connector 100-240V + Fuse T2AL/250V Installation Remove all packing materials from the Club Par 12-6 RGBWAUV. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly.
Club Par 12-6 RGBWAUV Control Modes There are 5 modes: • Built-in programs • Manual Mode • Static Color • Sound-controlled • DMX-512 (6CH or 11CH) One Club Par (Built-in programs, Static Color Mode and Manual Mode) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
Club Par 12-6 RGBWAUV Multiple Club Pars DMX Set Up Fig. 03 Note : Link all cables before connecting electric power Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode.
Club Par 12-6 RGBWAUV The Club Par 12-6 RGBWAUV can be operated with a controller in control mode or without the controller stand-alone mode. Control Panel A) LED display MODE button C) SETUP button D) UP button DOWN button Fig. 04 Control Mode The fixtures are individually addressed on a data-link and connected to the controller.
Club Par 12-6 RGBWAUV Main Menu Options DMX-512 Mode Channel Mode Program Speed Built-in programs Sound-controlled Mode Static Color Mode Strobe Green Blue Amber White Mode Led On/Off Temperature Version Reset 1. DMX-512 Mode With this menu, you can set the DMX address and select the desired channel mode.
Club Par 12-6 RGBWAUV 3. Speed 01) Press the MODE button until the display shows 02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the run speed of the built-in programs. The adjustment range is between , 00-99 (from fast to slow).
Club Par 12-6 RGBWAUV 11. Amber With this menu, you can manually adjust the intensity of the amber LEDs. 01) Press the MODE button until the display shows 02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the intensity of the amber LEDs.
Club Par 12-6 RGBWAUV DMX Channels 6 channels Channel 1 – Red 0-255 Gradual adjustment Red, from 0-100% Channel 2 – Green 0-255 Gradual adjustment Green, from 0-100% Channel 3 – Blue 0-255 Gradual adjustment Blue, from 0-100% Channel 4 – Amber...
Page 18
Club Par 12-6 RGBWAUV Channel 9 – Built-in Programs Not functional 10-19 Program 1 20-29 Program 2 30-39 Program 3 40-49 Program 4 50-59 Program 5 60-69 Program 6 70-79 Program 7 80-89 Program 8 90-99 Program 9 100-109 Program 10...
04) The electric power supply cables must not show any damages or material fatigue. The Club Par 12-6 RGBWAUV requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth.
Club Par 12-6 RGBWAUV No Response to DMX Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. 01) Check the DMX setting. Make sure that DMX addresses are correct. 02) Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power.