Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Par 64 100W COB UV Schuko power cable (1 m) ...
Page 4
For replacement use fuses of same type and rating only. • The user is responsible for correct positioning and operating of the Par 64 100W COB UV. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
Par 64 100W COB UV • Repairs, servicing and electric connection must be carried out by a qualified technician. • WARRANTY: Till one year after date of purchase. Operating Determinations • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects.
Par 64 100W COB UV The Par 64 100W COB UV can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug.
Par 64 100W COB UV Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Par 64 100W COB UV Description of the device Features The Par 64 100W COB UV is a theatre spotlight effect with high output. Input voltage: 100-240V, 60/50Hz Power consumption: 100W Light source: 1 x 100W COB UV LED ...
Par 64 100W COB UV Installation Remove all packing materials from the Par 64 100W COB UV. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly.
04) The electric power supply cables must not show any damages or material fatigue. The Par 64 100W COB UV requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth.
Need help?
Do you have a question about the Par 64 100W COB UV and is the answer not in the manual?
Questions and answers