Drive Chain Slack Check - Yamaha BLASTER YFS200T Owner's Manual

a. Drive chain slack
a. Flèche de la chaîne de transmission
a. Tensión de la cadena de transmisión
a
EBU01144

Drive chain slack check

NOTE:
Move the ATV back and forth and find the tight-
est position of the drive chain. Check and/or
adjust the chain slack while it is in this tightest
position.
To check the drive chain slack, all tires must be
touching the ground and there should be no
weight on it. Check the drive chain slack at the
position shown in the illustration Normal slack is
approximately 30–40mm. If the slack exceeds
40 mm , adjust it to specification.
8-73