Yamaha BLASTER YFS200T Owner's Manual page 294

4
1
1. Clamp screw (×2)
3. Screw
1. Vis de collier (×2)
2. Plaque de fixation du bouchon du carburateur
3. Vis
1. Tornillos de sujeción (×2)
2. Placa de seguridad de la tapa del carburador
3. Tornillo
1
5
4
3
2
1. Mixing chamber cap 2. Throttle valve
3. Holder 4. Screw (×2)
1. Couvercle de chambre de mélange
3. Support 4. Vis (×2)
1. Tapa de la cámara de mezcla
3. Soporte 4. Tornillo (×2) 5. Cable de aceleración
2
3
1
2. Securing plate
4. Mixing chamber cap
4. Couvercle de la chambre
4. Tapa de la cámara de mezcla
5. Throttle cable
2. Papillon d'accélération
5. Câble d'accélération
2. Mariposa
4. Loosen the clamp screws on each side of
the carburetor, and then remove the carbu-
retor.
5. Remove the securing plate by removing the
screw.
6. Remove the mixing chamber cap by
unscrewing it.
7. Disconnect the throttle cable from the throt-
tle valve by removing the holder screws and
holder.
8-45