Initial Camcorder Setup - Vivitar DVR 1240HD User Manual

Initial Camcorder Setup

1) Installing the Battery
Make sure the battery has been inserted properly into your digital camcorder, according to the
polarity shown inside the battery compartment. (See photo above.)
Make sure to insert the lithium battery all the way into the battery compartment.
To Charge the Battery:
Upon first use make sure the battery is fully charged.
To charge the battery, slide off the battery compartment cover and insert the battery correctly into
the camcorder (as shown above). Make sure the camcorder is powered off.
Follow one of the steps below to charge the battery:
A. Charge the battery using the USB connection cable (included) and your computer:
- Connect one end of the USB cable into the USB port on your camcorder.
- Connect the other end of the USB cable to the USB port on your computer.
- The charge light will turn off when the battery is fully charged.
B. Charge the battery using the USB connection cable (included) and the AC Charger (included):
- Connect one end of the USB cable into the USB port on your camcorder.
- Connect the other end of the USB cable to the AC Charger and then plug the AC Charger into
a power socket.
- The charge light will turn off when the battery is fully charged.
4