Powering On/Off Your Digital Camcorder - Vivitar DVR 1240HD User Manual

Powering ON/OFF Your Digital Camcorder

 Make sure the battery has been installed properly into your digital camcorder and fully charged.
 Make sure a Micro SD card has been installed properly into your camcorder.
(Micro SDHC Class 4 card up to 32GB - SD Card not included)
Powering the camcorder ON
Flip open the LCD display panel. Press the Power button to turn your camcorder ON.
The camcorder will be in Video Capture Mode to start.
Powering the camcorder OFF
While the camcorder is on, you can press the Power button again at any point to turn your
camcorder OFF. You will see a "Goodbye" splash screen and then the camcorder will power off
completely.
Alternatively, you can press the MENU (Home) button and then tap the Power Off icon. Tap 'Off' then
tap SAVE & EXIT to select to power off the digital camcorder.
NOTE: Your digital camcorder also has an Auto Power Off feature that automatically turns off your
camcorder after a specific period of time that your camcorder is left idle. The Auto Power Off time can
be set from the Setup/Auto Off menu settings.
11