1. Headlight bulb
6. Install the bulb holder by pushing it in and turn-
ing it clockwise.
7. Install the bulb holder cover and the cover at
the rear of the headlight. NOTICE: Make sure
the headlight bulb holder cover is securely
fitted over the bulb holder and seated
properly.
[ECB00671]
8. Adjust the headlight beam if necessary.
EBU25551
Adjusting a headlight beam
ECB00690
NOTICE
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the headlight beam
adjusting screw in direction (a).
1
To lower a headlight beam, turn the adjusting
screw in direction (b).
1. Headlight beam adjusting screw
8-46
(a)
(b)
1
8