Replacing The Fuse; Replacing A Headlight Bulb - Yamaha GRIZZLY 125 YFM125GB Owner's Manual

Table of Contents

Advertisement

EBU25263

Replacing the fuse

1
1. Fuse
2. Spare fuse
The fuse holder is located on the right side of the
ATV.
If the fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off all electrical
circuits.
ECB00640
NOTICE
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
2
2. Remove the blown fuse, and then install a
new fuse of the specified amperage.
WARNING! Always use a fuse of the spec-
ified rating, and never use a substitute ob-
ject in place of the proper fuse. An
improper fuse or a substitute object can
cause damage to the electrical system,
which could lead to a fire.
Specified fuse:
15.0 A
3. Turn the key to "ON" and turn on the electrical
circuits to check if the devices operate.
4. If the fuse immediately blows again, have a
Yamaha dealer check the electrical system.
EBU25481

Replacing a headlight bulb

If a headlight bulb burns out, replace it as follows.
8-44
[EWB02172]
8

Advertisement

Table of Contents
loading

Table of Contents