Handlebar Switches - Yamaha GRIZZLY 350 YFM35GDXG Owner's Manual

EBU18065

Handlebar switches

4
1. Light switch " /
2. Engine stop switch "
3. Start switch " "
4. Horn switch " "
EBU18081
Engine stop switch "
Set this switch to "
The engine stop switch controls the ignition and
stops the engine when it is running. Use this
switch to stop the engine in an emergency situa-
tion. The engine will not start or run when this
switch is set to "
/OFF"
/ "
/ "
" before starting the engine.
".
EBU18102
Start switch " "
Push this switch to crank the engine with the start-
er. See the starting instructions on page 6-1 prior
to starting the engine.
EBU18164
Light switch "
Set this switch to "
the taillight and the meter lighting. Set the switch
to " " to turn on the high beams, the taillight
and the meter lighting. Set the switch to "OFF" to
turn off all the lights.
ECB00044
NOTICE
Do not use the headlights with the engine
turned off for an extended period of time, oth-
erwise the battery may discharge to the point
that the starter motor will not operate properly.
If this should happen, remove the battery and
recharge it. (See page 8-39.)
EBU18171
Horn switch "
Press the switch to sound the horn.
4-5
/ /OFF"
" to turn on the low beams,
"