Yamaha GRIZZLY 350 YFM35GDXG Owner's Manual page 106

1. Tailpipe bolt
2. Tailpipe
2. Remove the tailpipe by pulling it out of the
muffler.
8
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from
the spark arrester portion of the tailpipe and
inside of the tailpipe housing.
1. Tailpipe
2. Spark arrester
4. Insert the tailpipe into the muffler and align
the bolt holes.
5. Install the tailpipe bolts and tighten them to
the specified torque.
Tightening torque:
Tailpipe bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
8-23