Toshiba RAS-05J2KVG-EE Service Manual page 109

Split type
Hide thumbs Also See for RAS-05J2KVG-EE:
Table of Contents

Advertisement

No.
Part name
3
Front panel
1) Stop operation of the air conditioner and turn
2) Open two screw caps and securely remove
3) Take off the hooks of front panel from top side
4) Slightly open the lower part of the front panel
Electric part
1) Follow the procedure item 3 .
4
box assembly
2) Remove screw holding the electric part cover.
4) Remove the earth screw and earth line from
5) Pull out TC sensor from sensor holder of the
6) Remove the 2 fixing screws that secures the
Procedures
off its main power supply.
screws (2 pcs.) at the front panel.
of the back body.
then pull the upper part of the front panel
toward you to remove it as shown on figure.
TA sensor
Earth line
TC sensor
3) Disconnect the connectors for the fan motor
and louver motor from P.C. board assembly.
Earth screw
Earth line
Washer
evaporator.
evaporator.
electric parts box assembly, unit display
assembly and remove the electric parts box
assembly.
Hooks of
front panel
Screw
Front panel
Back body
Fan motor connector
Louver motor connector
TC sensor
Sensor holder
- 109 -
FILE NO. SVM-19004
Remarks
Air inlet grille
Screw
Screw caps
Screw
Electric part cover
Electric parts box
Screw
Screw
Unit display
Front panel
Connectors

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents