Showing Input Signals; Volume Adjustment/Audio Channel Selection; On The Information Display; On The Status Display - ProHD DT-N21F Instructions Manual

Showing Input Signals

Volume Adjustment
1
When no menu screen is not displayed, revolve the "VOLUNE MENU/PUSH"button
2
Clockwise revolve "VOLUME MENU/PUSH" knob to volume up, and anticlockwise revolve to volume down. The volume value range is 0-31.
3
The "Volume" screen disappears automatically if no operations are made for 3 seconds.
Volume

On the Information Display

1 Time code (SDI)
Under SDI input, it can display Time code. If no Time code
information is detected, it will be displayed as "TC UNLOCKED".
User can set function keys F1～F4 or GPI pins as "Time code" to
2 UMD
Set up the UMD under "UMD" submenu.
3
AFD (SDI)
User can set function keys F1～F4 or GPI pins as "AFD" to turn
will be displayed as "AFD: UNLOCKED".
4 Audio Bar
Monitor the audio information. The relevant parameters like
position, audio channels and blending, etc. can be changed under "Audio Bar" submenu.
User can set function Keys F1～
5 Histogram
User can set function Keys F1～
6
Vector
The relevant parameters like Vector position, Vector color and Vector blending, etc. can be changed under "Vector" submenu.
User can set function Keys F1～
7 Waveform
Press "WFM" on the front panel to turn on/of this function. The relevant parameters like WFM position, WFM color and WFM blending, etc.
can be changed under "Waveform" submenu.

On the Status Display

Press "VOLUME MENU/PUSH" button, the main menu will pop up from
the left top of the screen, to display the current working status,
including:
1. Current input video format.
If no video input is locked, it will display "No Signal".
3. Color temperature value.
4. Scan mode.
5. Freeze Frame mode status.
6. The Function Key 1 setting.
7. The Function Key 2 setting.
8. The Function Key 3 setting.
9. The Function Key 4 setting.
15
TC：00:15:13:07
CAMERA 1
-09
-20
-48
1 2 3 4 5 6 7 8 9 10111213141516
L -20DB 01CH R -22DB 01CH
(4) (5) (6)
Main Menu
Exit&Status
＞ HDMI
Picture User Profile
＞
Color Temp
Color Temp
＞
Scan Mode
＞
Freeze Frame
GPI ＞
F1
＞
UMD
F2
＞
Marker
F3
Audio ＞
F4
Vector
＞
F5
＞
Waveform
System Version
＞
Display
System ＞
＞
OSD
Key Inhibit
＞
(1)
(2)
(3)
(7)
Status
XXX
1
XX 2
XXXX 3
XXX 4
XXX 5
XXX 6
XXX 7
XXX 8
XXX 9
XXX
XXX 10
9