Table of Contents
Advertisement
UMD
Setting UMD control parameters (TSL UMD Protocol V3.1/4.0, provided by Television System LTD.)
Item
Exit
RS485 Address
Position
Display Type
Baud Rate
Parity
Serial Port
Source ID
*1 Setting of "Source ID"
(1) Change the input to one that you want to assign a video source name for.
(2) Select "Source ID"
Each time you revolve the "MENU" button, the character changes as follows.
Space
(4) Press the "MENU" button to move the arrow to the next space.
The characters entered before moving the arrow are memorized.
(5) Repeat steps (3) and (4) (10 characters at maximum).
(6) Press MENU button to store the name.
UMD setup
Connect the external control equipment with the monitor
(1)
Set "Display Type" to "UMD"
(2)
Set "Serial Port" to RS485 or RS232 according to the port type of external
(3)
control equipment
Make sure the "address", "Baud Rate", "Parity" the same
(4)
Adjust the external control equipment and send UMD command, the UMD
(5)
information will be display as the right photo.
User can set the character and color of the UMD and the color of Tally1 and 2.
Marker
Settings for marker functions
Item
To do
Exit
Return Main Menu
Display setting
Marker
Adjust the ratio of marker
Marker Select
Safety Area
Safety Area setting
Fit Marker*1
Fit Marker setting
Display setting
Center Marker
Marker Color
Marker color setting
Marker Outside
Marker Outside color setting
actual display screen. When "Fit Marker" is On, the size of safety area is benchmarked against the area inside the scales marker,
accounting for 80% ~ 95% of the area inside the scales marker.
Example:
Safety Area
Marker select Center Marker Marker Outside
12
To do
Return Main Menu
Address setting
1 to 126: Set a particular address
Position setting
Choose Display Type
Baud Rate setting
Parity setting
Choose Serial Port
Setting of "Source ID"*1
0~9
A~Z
a~z
&()*+,-./:<>_
Setting value
White、Red、Green、Blue、Black、Gray
Marker: 4:3
Safety Area: 85%
Center Marker: On
Setting value
1 to 126
Top、Bottom
Source ID、UMD
38400、9600、19200
Even、None
RS485、RS232
Tally1
UMD
CAMERA 1
、On
、4:3、13:9、14:9、15:9、16:9、1.85:1、2.35:1
、80%、85%、90%、93%、95%
、On
、On
、Gray、Black
Marker: 4:3
Safety Area: 85%
Fit Marker: On
Tally2
of
Advertisement
Table of Contents
