Table of Contents
Advertisement
Index of Parts and Functionos (cont.)
Front panel
1
1
Speaker:
For SDI/HDMI embedded audio and analog audio monitoring. (Will not work if earphone is plugged in)
2
INPUT SELECT buttons/lamps
Selects an input.
SDI 1: E. AUDIO 3G/HD/SD SDI (IN 1) terminal
SDI 2: E. AUDIO 3G/HD/SD SDI (IN 2) terminal
HDMI:HDMI terminal
ANALOG: select from CVBS, VGA, Y/ Pb / Pr signal
The lamp for the selected input lights
●
3
FUNCTION button
You can use the functions assigned to this button.
4
WFM button
5
DISP button
6
VOLUME MENU/PUSH
When the menu is inactivated, press "VOLUME MENU/PUSH" to turn on the main menu
Revolve "VOLUME MENU/PUSH" to adjust settings or parameters, and press to apply
When the menu is inactivated, revolve "VOLUME MENU/PUSH" to adjust the sound volume
7
Picture adjustment knob
BRIGHT：Adjusts the picture brightness and the default value is 50.
CONTRAST：Adjusts the picture contrast and the default value is 50.
SATURATION：Adjusts the picture saturation and the default value is 50.
8
POWER
9
PHONE
3.5mm earphone socket, for SDI/HDMI embedded audio and analog audio monitoring.
8
4
SDI1
SDI2
HDMI ANALOG
F1
F2
F3
F4
WFM
DISP
5
2
3
Tally lamp
This lamp is controlled by the tally function of the
Make contact terminal. (
• You can select the color of the tally lamp from "Green",
"Red", or "Yellow".
6
8
BRIGHT
CONTRAST SATURATION
PHONE
MENU/ENTER
POWER
7
9
External Control on Page 17.)
1
Advertisement
Table of Contents
