ProHD DT-N21F Instructions Manual page 14

Vector
Setting for Vector scope and Histogram patterns
Item
Exit
Vector
Vector Position
Vector Blending
Vector Color
Histogram
Histogram Blending
Waveform
Setting for Waveform patterns
Item
Exit
Waveform
WFM Type
WFM Position
WFM Blending
WFM Color
WFM Single Line
WFM Line Count
*1: Only the "WFM Single Line" is set to "ON", the "WFM Line Count" can be adjusted.
"WFM Single Line" is to display the selected line waveform of "WFM Line Count"
WFM Single Line：
14
To do
Return Main Menu
Display setting
Vector Position setting
Vector Blending setting
Low: Set the background of the vector display gray
High: Set the background of the vector display transparent.
Vector Color setting
Display setting
Histogram Blending setting
Low: Set the background of the histogram display gray
High: Set the background of the histogram display transparent.
To do
Return Main Menu
Display setting
Waveform type setting
Waveform position setting
Waveform blending setting
Low: Set the background of the waveform display gray
High: Set the background of the waveform display transparent.
Waveform color setting
Display setting
WFM Line Count setting
Setting value
、On
Bottom Right、Center、Top Left、
Top Right、Bottom Left
、Low、High
Color、White、Green、False Color
、On
、Low、High
Setting value
、On
Y、Cb、Cr、R、G、B
Bottom Left、Bottom Right、
Center、Top Left、Top Right
Low、High、
White、Green、False Color
、On
0 to 1079
WFM Single Line：On