Winix 5300-2 User Manual

WINIX AIR CLEANER
Model 5300-2
Please read and follow all safety rules and instructions in
Use & Care
this manual before operating.
Guide
The product warranty is printed on the back of this guide,
so please keep it in a safe place for future use.
This product is manufactured for use only in USA/CA
3-STAGE AIR PURIFICATION
Odor
sensor
Power cord with plug
(This product is suitable for
120V only.)
PACKAGE
CONTENTS
English
User Manual
➌ PlasmaWave
Light sensor
Control Panel / Display Panel
➋ True HEPA filter
➊ Odor Absorbing Carbon
Filter
Pre-filter
Front panel
➊ Unit
➋ Pre-filter / (4) Odor
Absorbing Carbon Filters /
True HEPA Filter
➌ User Manual
5300-2 3
CONTENTS
3-Stage Air Purification
Controls
Set Up
Where to use
Installing the filters
Safety Instructions
Safety and Cautions
Operation
Initial Operation
Modes of Operation
Features and Settings
Care and Maintenance
Filter Care
Cleaning Care
Troubleshooting
Frequently Asked Questions
Unit Specifications
Product Warranty
This product is suitable for 120V only.
English
CONTROLS
Air
Outlet
Vent
PlasmaWave Indicator
Indicates whether
PlasmaWave is enabled or
Timer Indicator
disabled.
If timer has been set, the
LED light indicates the set
time of operation.
Mode Button
Press to cycle through
Fan Speed
and set the desired
Indicator
mode of operation
Indicates the
(Auto, Sleep).
current fan speed.
PlasmaWave Button
Enables or disables
PlasmaWave .
Air Quality Power Button
Indicator
Turns the unit on
or off.
Color-coded LED
indicates one of
Fan Speed Button
three levels of air
quality. Enables Manual operation of the
unit. Press to cycle through and
set the desired fan speed (Low,
Medium, High, Turbo).
English
3
4
5
6
8
9
10
11
13
17
18
20
22
5300-2 2
Reset Button
After replacing a filter,
press the RESET button
for at least 5 seconds.
Odor Sensor
When in Auto
Mode, detects the
amount of odor in
the environment
to adjust fan
speeds.
Light Sensor
Detects the
amount of
Timer Button
Press to cycle ambient light
through and set within the
desired length of environment,
to adjust the
operation (1hr,
brightness
4hr, 8hr,[NO
TIMER]) of the LED
indicators.
Change Filter Indicator
LED light indicates when it is time to
change the filter.
5300-2 4